The units of our new series energy 1500 VE1PUID are more or less the ”little brothers” of the units from our established series energy 3000.
The main :
Effective immediately two types of our series CXWUI 200W to 250W in 3U and 16HP are available with monitoring output. These power supplies include very precise regulators for output voltage and output current.
The setpoint values for output current and output voltage must be given to the unit as standardized signal (0 to 5V). The actual values for output current and output voltage are returned from the unit equally as standardized monitoring signal (0 to 5V). All signals are referring to output ground. Thus integration into an existing application should be possible without any additional effort.
A new variant of our VE3PUID meets the demand for a more capable electronic load. The higher power drain can be used to absorb the energy of an electric motor to make it decelerate faster.
Except for the new discharge circuitry and the more capable electronic load the VE3PUID 30.125/E is identical in construction to the standard unit and is available either as 19” unit VE3PUID 30.125/E or as table top unit VE3PUID 30.125/E/LAB.
Our low emission power supplies for 19”-systems have been revised and may now carry the ”S-mark” (UL, CSA, EU).
Additionally the input voltage ranges of these units have been widened to 90 to 127V and 185 to 254V respectively.
Effective immediately the power supplies of the series energy 3000 are available with digital interfaces. Programming and monitoring can be done via RS232, USB and CAN (with CANopen protocol acc. to CiA®).
Presentation of the series VE3PUID…
The series CPA 70W replaces the units of our series CP of the same power range. These new power supplies are equipped with automatic input voltage switching between the two ranges 90-132Vac and 187-164Vac. All CPA are layout compatible with their respective predecessors while keeping the same size.
Presentation of the series CPA…
Good things are superseded by better things: primary switchers CP 240W are being replaced by CXW 240W.
Presentation of the series CXW…
Due to the large number of different power supplies matching the right accessories (eg. connectors, wall mounting devices) to a certain power supply is often not easy. Now we offer the neccessary information in line with all other information about our power supplies.
Accessories for power supplies…
The family of low emission power supplies continues to grow. The series CAA now brings new units with 100W output power and out voltages ranging from 3.3V up to 60V.
Presentation of the series CAA 120W…
A whole rack system or installation can be switched on or off with the single switch on the front panel of the unit. Adding to that a start-up peak current limiter and three potentially separated auxiliary voltages are implemented.
Presentation of the mains switching card CN…
The product range of the series low emission has been broadened with the CAA series. Effective immediately 4HP wide single outputs with 24W output power and automatic input voltage detection are available.
Presentation of the series CAA…
Downloads (datasheets, descriptions) relating to series CAA…
The series CPA 144W is the successor of the successful series CP 120W. All CPA are not only plug compatible with their predecessors but offer enhanced features like the automatic input voltage detection. All standard types of the series CPA are certified by Nemko 
⇒FAQ.
Presentation of the series CPA 144W…
Downloads (datasheets, descriptions) relating to series CPA 144W…
The series CPA 360W is the successor of the successful series CP 360W. All CPA are not only plug compatible with their predecessors but offer enhanced features like the automatic input voltage detection.
Presentation of the series CPA 360W…
Downloads (datasheets, descriptions) relating to series CPA 360W…
With the series CPAU Kniel offers a new class of programmable primary switchers with output power up to 360W. All CPAU are mechnically fully compatible with their predecessor series CPP and offer additional advantages like the automatic input voltage detection.
Presentation of the series CPAU…
Downloads (datasheets, descriptions) relating to series CPAU…
The new series of programmable linearly regulated power supplies CUP comes in three output ranges with 15W, 30W or 60W output power respectively. With an external programming voltage ranging between 0V and 5Vdc the output voltage can be adjusted between 0V and the maximum output voltage of the unit.
Presentation of the series CUP…
Downloads (datasheets, descriptions) relating to series CUP…
More informationen for our customers: now we have the category downloads, where you find catalogues and application references about our power supplies. All documents are filed as PDF. For fast access you find the appropriate link in the upper menu.
See the catalogues and application references…
Chances are good that a question you have has already been asked by someone else. And has been aswered by us already. So we collected these questions we get from customers and our answers. The FAQ is available via the link in the upper menu.
See the FAQ…
The voltage monitoring cards VC 14 and VC 16 offer 4 or 6 potential-free input channels in order to monitor DC-voltages…
More about voltage monitoring cards…
